OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER - V 1.2 Instruction Manual page 45

VERSION: Displays the version of the system firmware.
CAPACITY: Displays the capacity of the HDD.
IP ADDRESS: Displays the IP address of the DVR.
MAC ADDRESS: Displays the MAC address of the DVR.
LOAD DEFAULT – Select LOAD DEFAULT to initialize the setting using ▲▼ buttons and press SEL button.
Then LOAD DEFAULT screen is displayed.
The DVR is rebooted automatically when LOAD DEFAULT is confirmed
ADMIN PASSWORD – Select ADMIN PASSWORD using ▲▼ buttons and press SEL button.
NETWORK PASSWORD – Select NETWORK PASSWORD using ▲▼ buttons and press SEL button.
Changing of PASSWORD (ADMIN/NETWORK)
①
Select ADMIN PASSWORD / NETWORK PASSWORD using ▲▼ buttons and press SEL button.
Then the Current password input screen is displayed.
②
Enter the current password using ▲(1)▼(2)▶(3)◀(4) buttons and press SEL button. Then the
New password input screen is displayed.
③
Enter the new password using ▲(1)▼(2)▶(3)◀(4) buttons and press SEL button. Then the
confirm password input screen is displayed.
④
Enter the same password as the new password using ▲(1)▼(2)▶(3)◀(4) buttons and press
SEL button. Then the "PASSWORD CHANGED" message is displayed.
DATE FORMAT – Refer to "2-3. Time setting"
SET DATE & TIME – Refer to "2-3. Time setting"
PTZ CONTROL – PTZ CONTROL is not working in this model.
LANGUAGE – Select LANGUAGE using ▲▼ buttons and Select a language using
Setting of REMOTE CONTROLLER ID (Example: Number 3)
①
Select REMOTE CONTROLLER ID using ▲▼ buttons and select the ID number from 3 using
buttons. And exit from the setup menu.
▶◀
②
Press the ID button on the remote controller and press a number 3 button. Then
displayed on the screen.
DLS – Refer to "2-4. DLS (Day Light Saving) time setting: Summer time setting".
Then the ADMIN PASSWORD screen is displayed.
Then the NETWORK PASSWORD screen is displayed.
45
buttons.
▶◀
icon is