Admin Domains And Login; Figure 53 Fabric With Ad0 And Ad255 - Brocade Communications Systems 1606 Administrator's Manual

15
Administrative Domains overview
FIGURE 53

Admin Domains and login

You are always logged in to an Admin Domain, and you can view and modify only the devices in that
Admin Domain.
If you have access to more than one Admin Domain, one of them is designated as your home
Admin Domain, the one you are automatically logged in to. If your home Admin Domain is deleted
or deactivated, then by default you are logged in to the lowest numbered active Admin Domain in
your Admin Domain List. The home Admin Domain, like the Admin Domain list, is a configurable
property of a non-default user account. Here is some additional information about AD accounts:
•
•
•
•
•
•
340
Fabric with AD0 and AD255
You can log in to only one Admin Domain at a time. You can later switch to a different Admin
Domain (see "Switching to a different Admin Domain context"
For default accounts such as admin and user, the home Admin Domain defaults to AD0 and
cannot be changed.
The Admin Domain list for the default admin account is 0–255, which gives this account
automatic access to any Admin Domain as soon as the domain is created, and makes this
account a physical fabric administrator.
The Admin Domain list for the default user account is AD0 only.
For user-defined accounts, the home Admin Domain also defaults to AD0 but an administrator
can set the home Admin Domain to any Admin Domain to which the account has been given
access.
If you are in any Admin Domain context other than AD0, the Admin Domain number is included
in the system prompt displayed during your session. The following are example prompts for
when you are in the AD0, AD1, and AD255 contexts, respectively:
switch:admin>
switch:AD1:admin>
switch:AD255:admin>
on page 358 for instructions).
Fabric OS Administrator's Guide
53-1001763-01