Viewing A Zone In The Defined Configuration; Validating A Zone - Brocade Communications Systems 1606 Administrator's Manual

Viewing a zone in the defined configuration

1. Connect to the switch and log in as admin.
2. Enter the zoneShow command, using the following syntax:
Example

Validating a zone

1. Connect to the switch and log in as admin.
2. Enter the cfgShow command to view the zone configuration objects you want to validate.
3. Enter the zone
4. Enter the following command to validate all zones in the zone database in the defined
Fabric OS Administrator's Guide
53-1001763-01
zoneshow[--sort] ["pattern"] [, mode]
If no parameters are specified, the entire zone database (both the defined and effective
configuration) is displayed.
The following example shows all zones beginning with A, B, or C, in ascending order:
switch:admin> zoneshow --sort "[A-C]*"
zone: Blue_zone 1,1; array1; 1,2; array2
zone: Bobs_zone 4,5; 4,6; 4,7; 4,8; 4,9
switch:admin> cfgShow
Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Purple_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
validate command to list all zone members that are not part of the current
--
zone enforcement table. Note that zone configuration names are case-sensitive; blank spaces
are ignored.
switch:admin> zone --validate "White_zone"
configuration.
switch:admin> sw5:root> zone --validate -m 1
Defined configuration:
cfg: cfg1
cfg: cfg2
zone: zone1
zone: zone2
alias: ali1
alias: ali2
------------------------------------
~ - Invalid configuration
* - Member does not exist
Zone creation and maintenance
zone1
zone1; zone2
1,1; ali1
1,1; ali2
10:00:00:05:1e:35:81:7f*; 10:00:00:05:1e:35:81:7d*
10:00:00:05:1e:35:81:09*; 10:00:00:05:1e:35:81:88*
11
251