Brocade Communications Systems 1606 Administrator's Manual page 544

A
Fabric configurations for interconnectivity
7.
504
state rev owner
known v520 0xfffc02
Device list: count 1
Type Pid COS
N 010e00;
Fabric Port Name: 20:0e:00:60:69:e2:18:b6
Permanent Port Name: 10:00:00:00:00:01:00:00
Port Index: 14
Share Area: No
Device Shared in Other AD: No
Switch entry for 3
state rev owner
known v410 0xfffc02
Device list: count 1
Type Pid COS
N 03f001; 2,3;10:00:00:00:c9:44:54:04;20:00:00:00:c9:44:54:04;
FC4s: FCP
NodeSymb: [36] "Emulex LP9002 FV3.92A2
Fabric Port Name: 50:00:51:e3:70:9a:3d:e8
Permanent Port Name: 10:00:00:00:c9:44:54:04
Port Index: na
Share Area: No
Device Shared in Other AD: No
Switch entry for 4
state rev owner
known v410 0xfffc02
Device list: count 1
Type Pid COS
N 04f002;
Fabric Port Name: 50:06:06:91:23:45:6a:13
Permanent Port Name: 10:00:00:00:00:03:00:00
Port Index: na
Share Area: No
Device Shared in Other AD: No
All of the devices from both LSANs should appear in the output. If the devices do not appear in
the output, issue the cfgShow command to verify your zone configuration. Use the cfgactvshow
command to display the zone configuration currently in effect. The following example
illustrates the use of cfgactvshow.
switch:admin> cfgactvshow
Effective configuration:
cfg:test
zone:lsan_san
10:00:00:00:00:03:00:00
10:00:00:00:00:01:00:00
zone:lsan_test
50:06:01:60:38:e0:0b:a4
10:00:00:00:c9:44:54:04
Log into the FC router and run the lsanZoneShow -s command to verify FIDs and devices to be
shared among LSANs.
PortName
3;10:00:00:00:00:01:00:00;10:00:00:00:00:00:01:00;
PortName
PortName
3;10:00:00:00:00:03:00:00;10:00:00:00:00:00:03:00;
NodeName
NodeName
DV5-5.10A10 "
NodeName
Fabric OS Administrator's Guide
53-1001763-01