18
Displaying bottleneck detection configuration details
1. Connect to the switch to which the target port belongs and log in as admin.
2. Enter the bottleneckmon
Example
Displaying bottleneck detection configuration details
Using the following procedure, you can display details of the bottleneck detection configuration,
including the following:
•
•
•
•
1. Connect to the switch and log in as admin.
2. Enter the bottleneckmon
Example
Changing bottleneck alert parameters
When you enable bottleneck detection, you can configure alert parameters that apply to every port
on the switch. After you enable bottleneck detection, you can change the alert parameters on all
eligible ports on the switch or on individual ports. You can also change the alert parameters on
ports that have been excluded from bottleneck detection.
420
To later include the port, enter the bottleneckmon
switch:admin> bottleneckmon --exclude 4
Whether the feature is enabled
Switch-wide alerting parameters
Port-specific alerting parameters
Excluded ports
configuration for the switch.
switch:admin> bottleneckmon --status
Bottleneck detection - Enabled
==============================
Switch-wide alerting parameters:
============================
Alerts
Latency threshold for alert
Congestion threshold for alert - 0.800
Averaging time for alert
Quiet time for alert
Excluded ports:
===============
Port
====
12
13
14
exclude command to exclude the port from bottleneck detection.
--
status command to display the details of bottleneck detection
--
- Yes
- 0.100
- 300 seconds
- 300 seconds
include command.
--
Fabric OS Administrator's Guide
53-1001763-01