Configuration File Backup - Brocade Communications Systems 1606 Administrator's Manual

8

Configuration file backup

Chassis section
There is only one chassis section within a configuration. It defines configuration data for chassis
components that affects the entire system—not just an individual logical switch. The chassis
section is included in non-Virtual Fabric modes only if you use the configUpload
following software components are defined in the chassis area:
•
•
•
•
•
•
•
•
•
Switch section
There is always at least one switch section for the default switch or a switch that has Virtual Fabric
mode disabled, and there are additional sections corresponding to each additionally defined
logical switch instance on a switch with Virtual Fabric mode enabled. These are the switch-specific
data that affect only that logical switch behavior. The following components are in the switch
section of the configuration file:
•
•
•
•
•
•
•
•
•
•

Configuration file backup

In case the configuration is lost or unintentional changes are made, keep a backup copy of the
configuration file. You should keep individual backup files for all switches in the fabric and avoid
copying configurations from one switch to another. The configUpload command, by default, only
uploads the switch context configuration for the logical switch context in which the command is
executed.
178
FC Routing
Chassis configuration
FCoE chassis configuration
Licenses DB
Bottleneck configuration
DMM_WWN
Licenses
GE blade mode
Fabric Watch chassis configuration
Boot parameters
Configuration
Bottleneck configuration
FCOE configuration
Zoning
Defined security policies
Active security policies
iSCSI
CryptoDev
FICU saved files
all command. The
-
Fabric OS Administrator's Guide
53-1001763-01