Brocade Communications Systems 1606 Administrator's Manual page 239

10. Optionally, after the failover, connect to the switch, and log in again as admin. Using a separate
11. Enter the firmwareShow command to display the new firmware versions. Following is an
Fabric OS Administrator's Guide
53-1001763-01
Do you want to continue [Y]: y
The firmware is being downloaded to the Standby CP. It may take up to 10
minutes
session to connect to the switch, enter the firmwareDownloadStatus command to monitor the
firmware download status.
sw0:FID128:admin> firmwaredownloadstatus
[1]: Mon Mar 22 04:27:21 2010
Slot 7 (CP1, active): Firmware is being downloaded to the switch. This step
may take up to 30 minutes.
[2]: Mon Mar 22 04:34:58 2010
Slot 7 (CP1, active): Relocating an internal firmware image on the CP blade.
[3]: Mon Mar 22 04:35:29 2010
Slot 7 (CP1, active): The internal firmware image is relocated successfully.
[4]: Mon Mar 22 04:35:30 2010
Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition
of the switch.
[5]: Mon Mar 22 04:37:24 2010
Slot 7 (CP1, standby): The firmware commit operation has started. This may
take up to 10 minutes.
[6]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): The commit operation has completed successfully.
[7]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): Firmwaredownload command has completed successfully.
Use firmwareshow to verify the firmware versions.
example of firmwareShow output on the Brocade 48000 director.
switch:admin> firmwareshow
Slot Name Appl Primary/Secondary Versions
-----------------------------------------------------------
2 FA4-18 FOS
SAS
DMM
5 CP0 FOS
6 CP0 FOS
7 FA4-18 FOS
SAS
DMM
* Local CP
Firmware download on an enterprise-class platform
v6.4.0
v6.4.0
v3.3.0
v3.3.0
v3.3.0
v3.3.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v3.3.0
v3.3.0
v3.3.0
v3.3.0
Status
Standby *
Active
9
199