MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 98

Managing flash media server
Table of Contents

Advertisement

Description
The tags nested within the
cluster of, edge or proxy servers.
Contained tags
,
,
Allow
AllowZones
ClusterMonitorInterval
,
SecureProxyInfo
TTL
BindInfo
This tag identifies the IP and port number that Flash Media Server listens on for proxy
autodiscovery messages.
Description
If no IP address is specified, Flash Media Server listens on the port specified by the Windows
system variable
INADDR_ANY
By default, Flash Media Server listens on any available interface on port 67.
If this computer has multiple interfaces, an automatic proxy discovery message will be
received by each available interface unless you specify a specific interface to bind to.
Syntax
<BindInfo>[ip]:<port></BindInfo>
See also
in this container.
ProxyInfo
BroadcastAddress
This tag specifies the address to use when broadcasting FPAD (Flash Proxy Auto-Discovery)
messages.
Description
The default address is 255.255.255.255.
BroadcastPort
This tag specifies the port to use when broadcasting FPAD messages.
Description
The default port is 67. This is a DHCP (Dynamic Host Configuration Protocol) port.
98
Configuration Files
AutoDiscovery
,
BindInfo
BroadcastAddress
,
,
Deny
Enable (AutoDiscovery)
.
container set up and configure a single, or a
,
BroadcastPort
,
MyZone
,
,
,
Order
ProxyInfo
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flash media server 2

Table of Contents