MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 151

Description
The following table identifies the attributes for the
Value
true
false
http1.1only
keepalive
Although you can assign any port number for HTTP tunneling, there is a risk of conflict
with another application that may be assigned to the same port. For example, if you
configure Flash Media Server to use port 80 to support HTTP tunneling, the web server
and Flash Media Server can not both bind to the same port 80.
HostPort
This tag specifies which IP address and port(s) Flash Media Server is to bind to.
Description
If you wish to bind to multiple IP addresses on this adaptor, add a
additional IP that you wish to bind to.
Syntax
The connection string for the
<HostPort><ip>:<port>,<port>,...,<port></HostPort>
Examples
<HostPort>:1935,80,-443</HostPort>
A port is marked as secure by specifying a minus sign in front of the port number in the
tag. This specifies that Flash Media Server will listen on any interface, on ports
HostPort
1935, 80, and 443, where 443 is designated as a secure port that will only receive RTMPS
connections. Attempting an RTMPS connection to ports 1935 or 80 will result in a failure to
connect. The client will attempt to perform an SSL handshake that the server will fail to
complete. Similarly, a regular RTMP connection to port 443 will fail because the server will
try to perform an SSL handshake that the client will fail to complete.
<HostPort name="edge1">127.0.0.1:1935,80,443</HostPort>
This string instructs the adaptor to bind to the IP address for Edge1 at IP address
HostPort
127.0.0.1 on ports 1935, 80, and 443.
<HostPort>:1935,80,443</HostPort>
Description
Allow all HTTP tunneling connections.
Disallow all HTTP tunneling connections.
Allow only HTTP 1.1 tunneling connections.
Allow HTTP 1.1 or HTTP 1.0 keepalive connections.
tag has the following syntax:
HostPort
tag and describes their effect.
Enable
HostPort
XML configuration files
tag for each
151