MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 91

Server.xml tag
Deny
Diagnostic
ECCP
Edge
EdgeCore
Enable (Access)
Enable (Application)
Enable (AutoDiscovery)
Enable (Diagnostic)
FLVCacheSize
FreeMemRatio
FreeRatio
GID
GlobalQueue
GlobalRatio
HeapSize
HostPort
HTTP
IPCQueues
Description
Specifies which automatic proxy discovery messages not to
respond to.
Container tag; contains tag to enable the diagnostic log file.
Container tag; contains tags to configure the edge core
communication protocol.
Container tag; contains tags to configure the RTMP
protocol for FMSEdge.exe process.
Container tag; these tags control the IPC message queues
used by edge and core processes to communicate with
each other.
Enables or disables the Access logs.
Enables or disables the Application logs.
Enables or disables the Flash Media Server automatic proxy
discovery process.
Enables or disables the diagnostic logs.
Specifies the maximum size of the FLV cache.
Sets the maximum percentage of total memory that the total
pool size may occupy.
Specifies the percentage of the message cache to be
consumed by the free list on a per-thread basis.
Contains the group ID of the server process.
Container tag; these tags control the IPC message queue
used by processes to communicate with each other.
Specifies the percentage of the message cache that can be
consumed by the free list on a global basis.
Specifies the maximum size of the shared memory heap
used for a IPC message queue.
Specifies the IP address and port that the Flash Media
Admin Service binds to.
Container tag; contains tags to configure the HTTP
connector, which is used by remote sites for accessing
Flash Media Server.
Container tag; contains tags to configure the IPC
(interprocess communication) queues
XML configuration files 91