MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 179

Description
If a virtual host is running in
configure the properties of an outgoing SSL connection to an upstream server, then you must
enable this section and configure its SSL tags appropriately.
When Flash Media Server acts as a client to make an outgoing SSL connection, the following
sequence of events takes place:
The tags in the Vhost.xml file are evaluated first.
SSL
If the tags in the Vhost.xml file override the
SSL
Media Server uses the
If the tags in the Vhost.xml file match the SSL tags in the Server.xml file, Flash Media
SSL
Server uses the default values for
If the tags in a proxy's Vhost.xml file are not present, Flash Media Server uses the
SSL
default values specified in the
to upstream servers.
When Flash Media Server is running in local mode as an origin server, the SSL
information in the vhost.xml file is not evaluated.
You can also override the configuration for outgoing SSL connections for an individual virtual
host in Vhost.xml by copying the
the Vhost.xml file.
For more information on the SSL tags in Server.xml, see
Contained tags
container
SSLClientCtx
,
SSLRandomSeed SSLRandomSeed
See also
SSLClientCtx
Streams
This tag specifies the virtual directory mapping for recorded streams.
Description
You can specify multiple virtual directory mappings for streams by adding additional
tags—one for each virtual directory mapping.
Example
<Streams>foo;c:\data</Streams>
mode as a proxy or edge server and you want to
remote
tags in the Vhost.xml file to configure the connection.
SSL
in the Server.xml file to configure the connection.
SSL
section of Server.xml to configure the
SSL
tags in Server.xml to the corresponding
SSL
,
SSLSessionCacheGC
tags in the Server.xml file, Flash
SSL
"SSL" on page 119.
tags
XML configuration files
connection
SSL
section in
SSL
Streams
179