MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 201

Managing flash media server
Table of Contents

Advertisement

The interval for an idle post ranges from 0 to 4064 milliseconds. If the
tag is set to a value that lies outside of this range, the default value of 512 milliseconds is used.
At times the server will not be able to send any data to the client for the selected
duration.
See also
,
HTTPTunnel
IdleAckInterval
Interface
This tag defines the name to use as the outgoing network interface.
Description
The name can be an interface name, an IP address, or a host name.
Interval
This tag specifies in milliseconds the interval for sending silence messages when no audio is
being published to a live stream.
Description
Silence messages are used to support older versions of Flash Player. Flash Media Server will
only send the silence message to clients which are specified in the
section. Bit-flag 0x01 is used to control the silence message.
Client
The default interval is 3 seconds. Set this to 0 to disable the silence message transmission.
See also
UserAgent
JSEngine
Container tag.
Description
The tags nested within this container configure the JavaScript engine.
Contained tags
container;
FileObject
MaxTimeOut (JSEngine)
UserAgent
,
, and
RuntimeSize
ScriptLibPath
XML configuration files
IdlePostInterval
tag in the
tags
201

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flash media server 2

Table of Contents