MACROMEDIA FLASH MEDIA SERVER 2-MANAGING FLASH MEDIA SERVER Manual page 131

Deny (HTTPCommands)
Flash Media Server uses two tags named
tag in the
Deny HTTPCommands
Description
This tag lists the Flash Media Admin Service commands that an administrator cannot
Deny
use via HTTP.
You can deny an administrator the use of multiple HTTP commands to access the Admin
Service by creating a comma-separated list of those HTTP commands.
See also
Allow (HTTPCommands)
container.
Deny (User)
Flash Media Server uses two tags named
tag in the
Deny HTTPCommands
This tag lists those hosts from which the administrator is not authorized to connect to Flash
Media Admin Service. You restrict the administrator's access by creating a comma-delimited
list of those host names or domain names and/or (full or partial) IP addresses.
Example
<Deny>foo.yourcompany.com,macromedia.com,10.60.1.133,10.60</Deny>
This example lists the computers sending connections requests that Flash Media Admin
Service will not accept.
See also
in the
Allow (Users)
container.
Enable
This tag enables or disables the use of HTTP requests to execute administrative commands.
Description
Setting this tag enables HTTP requests to execute administrative commands. To disable
administrative access through the use of HTTP requests, do not set this tag.
Deny
container.
in the HTTPCommands container;
Deny
container.
container;
User Deny (HTTPCommands)
: the tag in the
Deny
Deny (User)
: the tag in the
Deny
in the HTTPCommands
container, and the
User
in the User
container, and the
User
XML configuration files 131