MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual page 54

To add noise to an image:
Select the image.
1
Do one of the following to open the Add Noise dialog box:
2
In the Property inspector, click the Add Effects button, and choose Noise > Add Noise from
the Add Effects pop-up menu.
Choose Filters > Noise > Add Noise.
Note: Applying a filter from the Filters menu is destructive; that is, it cannot be undone except
when Edit > Undo is an option. To maintain the ability to adjust, turn off, or remove this filter, apply it
as a Live Effect, as described in the first bulleted option in this step. For more information, see
"Using Live Effects" on page
Drag the Amount slider to set the amount of noise.
3
Values range from 1 to 400. An increase in amount results in an image with more randomly
placed pixels.
Select the Color check box to apply color noise. Leave the check box unchecked to apply
4
monochrome noise only.
Click OK.
5
54 Chapter 2: Working with Bitmaps
119.