MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual page 50

To blur an image using Motion Blur:
Select the image.
1
Do one of the following to open the Motion Blur dialog box:
2
In the Property inspector, click the Add Effects button, and choose Blur > Motion Blur
from the Add Effects pop-up menu.
Choose Filters > Blur > Motion Blur.
Drag the Angle dial to set the direction of the blur effect.
3
Drag the Distance slider to set the strength of the blur effect.
4
Values range from 1 to 100. An increase in distance results in a stronger blur effect.
Click OK.
5
To blur an image using Radial Blur:
Select the image.
1
Do one of the following to open the Radial Blur dialog box:
2
In the Property inspector, click the Add Effects button, and choose Blur > Radial Blur from
the Add Effects pop-up menu.
Choose Filters > Blur > Radial Blur.
Drag the Amount slider to set the strength of the blur effect.
3
Values range from 1 to 100. An increase in amount results in a stronger blur effect.
Drag the Quality slider to set the smoothness of the blur effect.
4
Values range from 1 to 100. An increase in quality results in a blur effect with fewer repetitions
of the original image.
Click OK.
5
To blur an image using Zoom Blur:
Select the image.
1
Do one of the following to open the Zoom Blur dialog box:
2
In the Property inspector, click the Add Effects button, and choose Blur > Zoom Blur from
the Add Effects pop-up menu.
Choose Filters > Blur > Zoom Blur.
Drag the Amount slider to set the strength of the blur effect.
3
Values range from 1 to 100. An increase in amount results in a stronger blur effect.
Drag the Quality slider to set the smoothness of the blur effect.
4
Values range from 1 to 100. An increase in quality results in a blur effect with fewer repetitions
of the original image.
Click OK.
5
50 Chapter 2: Working with Bitmaps