MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual page 122

Applying beveled edges
Applying a beveled edge to an object gives it a raised look. You can create an inner bevel or an
outer bevel.
A rectangle, with Inner Bevel, and with Outer Bevel
To apply a beveled edge to a selected object:
Click the Add Effects button in the Property inspector, then choose a bevel option from the
1
pop-up menu:
Bevel and Emboss > Inner Bevel
Bevel and Emboss > Outer Bevel
Edit the effect settings in the pop-up window.
2
Click outside the window or press Enter to close it.
3
Applying embossing
You can use the Emboss effect to make an image, object, or text appear inset into or raised from
the canvas.
An object, with Inset Emboss, and with Raised Emboss
To apply an Emboss effect:
Click the Add Effects button in the Property inspector, then choose an emboss option from the
1
pop-up menu:
Bevel and Emboss > Inset Emboss
Bevel and Emboss > Raised Emboss
Edit the effect settings in the pop-up window.
2
If you want the original object to appear in the embossed area, choose Show Object.
When you finish, click outside the window or press Enter to close it.
3
Note: For backward compatibility, Emboss effects on objects in older documents open with the
Show Object option deselected.
122 Chapter 6: Using Live Effects