Applying Gradient And Pattern Fills - MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual

Applying gradient and pattern fills

You can change fills to display a variety of solid, dithered, pattern, or gradient characteristics that
range from solid colors to gradients. These characteristics resemble satin, ripples, folds, or
gradients that conform to the contour of the object to which you apply them. Additionally, you
can change various attributes of a fill, such as color, edge, texture, and transparency.
You can choose from a number of preset gradient and pattern fills, or you can create your own.
Note: A newly created fill assumes the current color displayed in the Fill Color box in the Tools panel.
Use the Fill options in the Property inspector or the Fill Options pop-up window to edit fill attributes.
Applying a pattern fill
You can fill a path object with a bitmap graphic, known as a pattern fill. Fireworks ships with
more than a dozen pattern fills, including Berber, Leaves, and Wood.
To apply a pattern fill to a selected object:
Do one of the following:
1
Choose Pattern from the Fill Options pop-up menu in the Property inspector.
Click the Fill Color box in the Tools panel, click Fill Options, and choose Pattern from the
Fill Options pop-up menu.
Choose a pattern from the Pattern Name pop-up menu.
2
The pattern fill appears in the selected object and becomes the active fill color.
Applying gradient and pattern fills 111