MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual page 13

A marquee appears around the selected range of pixels.
Pixels selected with a lower tolerance (above), then a higher tolerance (below)
To select similar colors throughout the document:
Select an area of color with a marquee or lasso tool, or with the Magic Wand tool.
1
Choose Select > Select Similar.
2
One or more marquees show all areas containing the selected range of pixels, according to the
current Tolerance setting in the Property inspector for the Magic Wand tool.
Note: To adjust the tolerance for the Select Similar command, choose the Magic Wand tool and
then change the Tolerance setting in the Property inspector before using the command.
Removing a selection marquee
You can remove a selection marquee without affecting the document.
To remove a marquee, do one of the following:
•
Draw another marquee.
•
Click outside the current selection with a marquee or lasso tool.
•
Press Escape.
•
Choose Select > Deselect.
Selecting pixels 13