MACROMEDIA FIREWORKS MX 2004-USING FIREWORKS Use Manual page 177

Applying multiple rollovers to a slice
You can drag more than one behavior handle from a single slice to create multiple swap behaviors.
For example, you can trigger a rollover and a disjoint rollover from the same slice.
A slice triggering a rollover behavior and a disjoint rollover behavior
Note: You can also add multiple behaviors using the Behaviors panel. For more information, see
"Using the Behaviors panel to add interactivity to slices" on page
To apply more than one rollover to a selected slice:
Drag a behavior handle from the selected slice to the edge of the same slice or onto another slice.
1
Dragging the handle to the upper left edge of the same slice creates a swap image, and dragging
it to another slice creates a disjoint rollover.
Select the frame of the swap image and click OK.
2
Create more rollovers by repeating steps 1 and 2 as many times as desired.
3
Removing a drag-and-drop rollover
You can easily remove a drag-and-drop rollover from a slice, hotspot, or button.
To remove a drag-and-drop rollover from a selected web object or button:
Click on the blue behavior line you want to remove.
1
Click OK to remove the swap image behavior.
2
Using the Behaviors panel to add interactivity to slices
In addition to rollovers, you can attach other types of interactivity to slices using the Behaviors
panel. You can create custom interactions by editing existing behaviors.
Note: Although you can create simple, disjoint, and complex rollovers with the Behaviors panel, the
drag-and-drop rollover method is recommended. For more information, see
interactivity to slices" on page
The following behaviors are available in Fireworks:
Simple Rollover
Frame 2 as the Over state. After you select this behavior, you need to create an image in the
second frame, under the same slice, to create the Over state. The Simple Rollover option is
actually a behavior group containing the Swap Image and Swap Image Restore behaviors.
replaces the image under the specified slice with the contents of another frame or
Swap Image
the contents of an external file.
174.
adds a rollover behavior to the selected slice using Frame 1 as the Up state and
177.
"Adding simple
Making slices interactive 177