Factory Defaults; Reboot - TP-Link TL-WA501G User Manual

upgrade file must accord with the current hardware version.
Note:
Do not turn off the AP or press the Reset button while the firmware is being upgraded.
The AP will reboot after the Upgrading has been finished.

3.7.2 Factory Defaults

This page (shown in Figure 3-22) allows you to restore the factory default settings for the AP.
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.1
•
The default Subnet Mask: 255.255.255.0
Note:
Any settings you have saved will be lost when the default settings are restored.

3.7.3 Reboot

This page (shown in Figure 3-23) allows you to reboot the AP.
Click the Reboot button to reboot the AP.
Some settings of the AP will take effect only after rebooting, which include:
•
Change LAN IP Address. (System will reboot automatically)
•
MAC Clone (system will reboot automatically)
•
DHCP service function.
•
Static address assignment of DHCP server.
•
Upgrade the firmware of the AP (system will reboot automatically).
TL-WA501G
Figure 3-22 Restore Factory Default
Figure 3-23 Reboot the AP
31
54M Wireless Access Point User Guide