Dhcp; Dhcp Settings - TP-Link TL-WA501G User Manual

54m wireless access point
Hide thumbs Also See for TL-WA501G:
Table of Contents

Advertisement

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - packets received by the station
Sent Packets - packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
Note:
This page will be refreshed automatically every 5 seconds.

3.5 DHCP

There are three submenus under the DHCP menu (shown in Figure 3-15): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.

3.5.1 DHCP Settings

The System can be set up as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the system on the LAN.
The DHCP Server can be configured on the page (shown in Figure 3-16):
TL-WA501G
54M Wireless Access Point User Guide
Figure 3-15 The DHCP menu
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents