Firmware Upgrade; Factory Defaults; Backup & Restore - TP-Link TL-WA901ND User Manual

Chapter 4
4. 5. 4.
TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com
1. Download the latest firmware file for the access point from our website www.tp-link.com.
2. Visit http://tplinkap.net, and log in using
3. Go to
4. Click
4. 5. 5.
1. Visit http://tplinkap.net, and log in using
2. Go to
•
•
•
•
4. 5. 6.
The configuration settings are stored as a configuration file in the access point. You can
backup the configuration file in your computer for future use and restore the access
point to the previous settings from the backup file when needed.
1. Visit http://tplinkap.net, and log in using
2. Go to
Downloaded from ManualsNet.com

Firmware Upgrade

and upgrade the firmware to the latest version.
System Tools > Firmware
Browse to locate the downloaded firmware file, and click Upgrade.

Factory Defaults

System Tools > Factory Defaults. Click
The default username: admin
The default password: admin
The default IP Address: 192.168.0.254
The default Subnet Mask: 255.255.255.0
Backup & Restore
System Tools > Backup &
search engine
admin (all lowercase) for both username and password.
Upgrade.
admin (all lowercase) for both username and password.
Restore to reset all settings to the default values.
admin (all lowercase) for both username and password.
Restore.
Configure the Access Point
Support page of our website
51