Firmware Upgrade; Factory Defaults - TP-Link TL-WA901N User Manual

Chapter 4
• Enable
• IP Address
sending ping packets.
• Interval
• Delay
restarted.
• Fail Count
this value is overrun, the access point will restart automatically.
4. 5. 4.
TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com
1. Download the latest firmware file for the access point from our website www.tp-link.com.
2. Visit http://tplinkap.net, and log in using the password you created.
3. Go to
4. Click
4. 5. 5.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to
•
•
Downloaded from ManualsNet.com
- Turn on/off Ping Watch Dog.
- The IP address of the target host where the Ping Watch Dog Utility is
- Time interval between two ping packets which are sent out continuously.
- Time delay before first ping packet is sent out when the access point is
- Upper limit of the ping packets the access point can drop continuously. If

Firmware Upgrade

and upgrade the firmware to the latest version.
System Tools > Firmware
Choose File to locate the downloaded firmware file, and click Upgrade.

Factory Defaults

System Tools > Factory Defaults. Click
The default IP Address: 192.168.0.254
The default Subnet Mask: 255.255.255.0
search engine
Upgrade.
Restore to reset all settings to the default values.
Configure the Access Point
Support page of our website
42