Factory Defaults; Backup & Restore - TP-Link TL-WA701ND User Manual

3.7.4 Factory Defaults

This page (shown in Figure 3-34) allows you to restore the factory default settings for the device.
Click the Restore button to reset all configuration settings to their default values.
•
Default User Name: admin
•
Default Password: admin
•
Default IP Address: 192.168.1.254
•
Default Subnet Mask: 255.255.255.0
Note:
Any settings you have saved will be lost when the default settings are restored.
3.7.5 Backup & Restore
This page (shown in Figure 3-35) allows you to save all configuration settings to your local
computer as a file or restore the device's configuration.
Click the Backup button to save all configuration settings to your local computer as a file.
To restore the device's configuration, follow these instructions:
•
Click the Browse... button to find the configuration file which you want to restore.
•
Click the Restore button to update the configuration with the file whose path is the one
you have input or selected in the blank.
Note:
The current configuration will be covered with the uploading configuration file. Wrong process will
lead the device unmanaged. The restoring process lasts for 20 seconds and the device will restart
automatically then. Keep the power of the device on during the process, in case of any damage.
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Figure 3-34 Restore Factory Defaults
Figure 3-35 Save or Restore the Configuration
54