Chapter 2 Hardware Installation
2.1 The Front Panel
The LED indicators displayed on the front panel, the status of these LED indicators represent the
device's working circs. For details, please refer to 2.1.1 LED Explanation
2.1.1 LED Explanation
Name
Status
Off
Power
On
Off
System
On
Flashing The AP is working properly
Off
LAN
On
Flashing There is an active device linked to the corresponding port
Off
WLAN
Flashing The Wireless Radio function is enabled
2.2 The Back Panel
TL-WA501G
Figure 2-1
No Power
Power on
The AP has a hardware error
The AP is initialising
There is no device linked to the corresponding port
There is a device linked to the corresponding port but no activity
The Wireless Radio function is disabled
Figure 2-2
54M Wireless Access Point User Guide
Description
3