Factory Defaults; Backup & Restore - TP-Link TL-WA801ND User Manual

4.8.5 Factory Defaults

Selecting System Tools > Factory Defaults allows you to restore the factory default settings for
the device on the screen shown in Figure 4-37.
Click Restore to reset all configuration settings to their default values.
•
Default User Name: admin
•
Default Password: admin
•
Default IP Address: 192.168.0.254
•
Default Subnet Mask: 255.255.255.0
Note:
Any settings you have saved will be lost when the default settings are restored.
4.8.6 Backup & Restore
Selecting System Tools > Backup & Restore allows you to save all configuration settings to your
local computer as a file or restore the device's configuration on the screen shown in Figure 4-38.
Click Backup to save all configuration settings to your local computer as a file.
To restore the device's configuration, follow these instructions:
•
Click Browse... to find the configuration file which you want to restore.
•
Click Restore to update the configuration with the file whose path is the one you have
input or selected in the blank.
Note:
The current configuration will be covered with the uploading configuration file.
1.
2. Wrong process will lead the device unmanaged.
3. The restoring process lasts for 20 seconds and restart automatically. Do not power off the
device during the process to avoid any damage.
TL-WA801ND 300Mbps Wireless N Access Point User Guide
Figure 4-37 Restore Factory Defaults
Figure 4-38 Save or Restore the Configuration
59