Note:
If you select client mode in Figure 3-6 the wireless status in Figure 3-3 will change, as it showed
below:
3.3 Network
You can configure the IP parameters of Network on this page.
Type - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to
configure IP address manually.
IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default:
192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.
MAC Address - the physical address of the AP, as seen from the LAN. The value can't be
changed.
Note:
TL-WA501G
54M Wireless Access Point User Guide
Figure 3-4 Network
11