TP-Link TL-WA501G User Manual page 24

2.
Verify the wireless security parameters for all access points, if any.
3. Verify connectivity across the LANs. A computer on any LAN segment should be able to
connect to the Internet or share files and printers with any other PCs or servers connected to
any of the three WLAN segments.
Note:
You can extend this repeating by adding up to 2 additional TL-WA501Gs configured in repeater
mode. However, since Repeater configurations communicate in half-duplex mode, the bandwidth
decreases as you add Repeaters to the network. Also, you can extend the range of the wireless
network with wireless antenna accessories.
Bridge (Point to Point) - This mode bridges the AP and another AP also in bridge mode to
connect two wired LANs. Please input the MAC address of the other AP in the field of MAC of
AP.
•
With AP mode: If you select this option, you AP will also support AP mode when it is in
Bridge(Point to Point) mode.
Here is an example of how to configure Point-to-Point Bridge. Please do the following:
TL-WA501G 54M Wireless Access Point User Guide
Figure 3-7 Wireless repeating
Figure 3-8 Point to Point Bridge
17