TP-Link TL-WA501G User Manual page 21

case-sensitive. For example, TP-LINK is NOT the same as tp-link.
Channel - This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Mode - Select the desired wireless mode. The options are:
•
54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
AP.
•
11Mbps (802.11b) - Only 802.11b wireless stations can connect to the AP.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the AP can be used. If your country or region is not listed, please contact
your local government agency for assistance.
The default region is United States. When you select your local region from the pull-down list, the
dialog shown in Figure appears below. Click OK.
Note:
Limited by local law regulations, version for North America does not have region selection option.
The wireless basic settings for this version are shown below.
TL-WA501G 54M Wireless Access Point User Guide
14