TP-Link TL-WA501G User Manual page 14

4. Select "Obtain an IP address automatically" by clicking the radio-button. Click OK
Configure the IP address manually
1. Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.*
(* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1,
DNS address is the value provided by ISP).
2. Now, you can run the Ping command in the command prompt to verify the network
connection between your PC and the Router. The following example is in Windows XP
TL-WA501G 54M Wireless Access Point User Guide
Figure 2-6
Figure 2-7
7