Firmware Upgrade; Factory Defaults - TP-Link TL-WA901N User Manual

Chapter 4
• Enable - Turn on/off Ping Watch Dog.
• IP Address - The IP address of the target host where the Ping Watch Dog Utility is
sending ping packets.
• Interval - Time interval between two ping packets which are sent out continuously.
• Delay - Time delay before first ping packet is sent out when the access point is
restarted.
• Fail Count - Upper limit of the ping packets the access point can drop continuously. If
this value is overrun, the access point will restart automatically.
4. 5. 4.

Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com and upgrade the firmware to the latest version.
1. Download the latest firmware file for the access point from our website www.tp-link.com.
2. Visit http://tplinkap.net, and log in using the password you created.
3. Go to System Tools
4. Click Choose File to locate the downloaded firmware file, and click Upgrade.
4. 5. 5.

Factory Defaults

1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to System Tools
• The default IP
• The default Subnet
> Firmware Upgrade.
> Factory Defaults. Click
Address: 192.168.0.254
Mask: 255.255.255.0
Configure the Access Point
Support
Restore to reset all settings to the default values.
page of our website
42