Wireless; Basic Settings - TP-Link TL-WA501G User Manual

TL-WA501G 54M Wireless Access Point User Guide
If you change the IP Address, you must use the new IP Address to login the AP.
If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the DHCP
sever will not take effect, until they are re-configured.

3.4 Wireless

Figure 3-5 The Wireless menu
There are four submenus under the Wireless menu (shown in Figure 3-5): Basic Settings,
Security Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be
able to configure the corresponding function. The detailed explanations for each submenu are
provided below.

3.4.1 Basic Settings

The basic settings for the wireless network are set on this page, Figure 3-6:
12