Customizing Thconfig Command Settings; Using The Nosave Command; Thconfig Command Restriction; Table 12 Configuration Options For Thconfig Command - Brocade Communications Systems 8 Administrator's Manual

6

Customizing thConfig command settings

TABLE 12
Class name
EE (End-to-end
Performance)
1
To change the default, provide an integer value.
2
Valid custom action setting values include snmp, raslog, portlog, email, or none.

Customizing thConfig command settings

Perform the following steps to customize thConfig settings. Refer to the Fabric OS Command
Reference Manual for more information.
1. Connect to the switch and log in as admin.
2. Enter the thconfig command to display the list of operands.

Using the nosave command

The nosave command prevents the configuration changes from being saved persistently. This
option allows you to make and view changes without overwriting the saved configuration.

thConfig command restriction

The Fabric and Security classes are not supported in Access Gateway mode.
52
Configuration options for thConfig command (Continued)
Valid area types
RXF - Receive areas
TXP - Transmit areas
switch:admin > thconfig
--
thconfig show [<class_name>] [-area <area_type>]
[-current]|[-thresh_level|-action_level <thresh_action>]
--
thconfig set <class_name> -area <area>
[-timebase <day:hour:minute:second:none>]
[-highth -value <val> -trigger above|below
-action [snmp],[raslog],[portlog],[email]|none]
[-lowth -value <val> -trigger above|below
-action [snmp],[raslog],[portlog],[email]|none]
[-buffer <val>]
[-nosave]
--
thconfig apply [<class_name> -area <area_type> -thresh_level <thresh_level>
-action_level <action_level>
--
thconfig cancel [<class_name> -area <area_type> -thresh_level <thresh_level>
-action_level <action_level>
--
thconfig show [<class_name>][-area_only]
Applying the configuration changes
Threshold Threshold Configuration recommendation
action
Default or Default or It is recommended that you leave the
1 2
Custom Custom entire Performance Monitor Class and
End-to-End Performance Monitor
Class area settings in their default
state (no alerts).
Fabric Watch Administrator's Guide
53-1001770-01