Ve_Port Class Default Settings; Table 18 Ve_Port Class Default Settings - Brocade Communications Systems 8 Administrator's Manual

VE_Port class default settings

Table 18
TABLE 18
Area
Packet Loss
State Changes
Utilization
Fabric Watch Administrator's Guide
53-1001770-01
provides default settings (per minute) for areas in the VE_Port class.
VE_Port class default settings
Description
The number of
packets routed
through a port
exceeds the port
bandwidth.
Monitors state
changes
The percent of
utilization for the
port at the time of
the last poll.
Port class guidelines and default settings
Default threshold Default alarm settings
settings
Unit: Errors Changed: 0
Time Base: minute Below: 0
Low: 0 Above: 0
High: 10 In-Between: 0
Buffer: 0
Unit: Changes Changed: 0
Time Base: minute Below: 0
Low: 0 Above: 0
High: 50 In-Between: 0
Buffer: 0
Unit: Errors Changed: 0
Time Base: minute Below: 0
Low: 0 Above: 0
High: 100 In-Between: 0
Buffer: 0
7
Threshold state
Informative
Informative
Out_of_range
In_range
Informative
Informative
Out_of_range
In_range
Informative
Informative
Out_of_range
In_range
67