Brocade Communications Systems 8 Administrator's Manual page 130

Supporting fabric os v6.4.0
Hide thumbs Also See for 8:
Table of Contents

Advertisement

A
Configuring port fencing using the fwConfigure command
5. Select advanced configuration by entering 4 at the Select an area = > prompt.
6. Select change above alarm by entering 14 at the Select choice prompt.
7.
8. Verify that the alarm matrix displays the Above Custom as 32, and then change the Threshold
9. Select custom by entering 2 at the Enter alarm level type = > prompt.
110
1
: refresh
2
: disable a threshold
3
: enable a threshold
4
: advanced configuration
5
: return to previous page
Select an area => : (1..5) [5] 4
1
: change behavior type
2
: change behavior interval
3
: change threshold boundary level
4
: change custom unit
5
: change custom time base
6
: change custom low
7
: change custom high
8
: change custom buffer
9
: apply threshold boundary changes
10 : cancel threshold boundary changes
Select choice => : (1..18) [18] 14
Set the alarm for Port Fencing (32) by entering 32 at the Enter above alarm matrix = > prompt.
Errlog-1, SnmpTrap-2, PortLogLock-4
RapiTrap-8, EmailAlert-16, PortFencing-32
Valid alarm matrix is 63
Enter above alarm matrix => : (0..63) [0] 32
alarm level to custom by entering 11.
1
: change behavior type
2
: change behavior interval
3
: change threshold boundary level
4
: change custom unit
5
: change custom time base
6
: change custom low
7
: change custom high
8
: change custom buffer
9
: apply threshold boundary changes
10 : cancel threshold boundary changes
Select choice => : (1..18) [18] 11
1
: Default
2
: custom
Enter alarm level type => : (1..2) [1] 2
11 : change threshold alarm level
12 : change changed alarm
13 : change below alarm
14 : change above alarm
15 : change inBetween alarm
16 : apply threshold alarm changes
17 : cancel threshold alarm changes
18 : return to previous page
11 : change threshold alarm level
12 : change changed alarm
13 : change below alarm
14 : change above alarm
15 : change inBetween alarm
16 : apply threshold alarm changes
17 : cancel threshold alarm changes
18 : return to previous page
Fabric Watch Administrator's Guide
53-1001770-01

Advertisement

Table of Contents
loading

Table of Contents