8. Enter the IP address for the switch in the Host field in the MIB browser. Enter the community
9. View and listen for trap details from a MIB browser menu.
NOTE
Any changes related to Fabric Watch, such as changing the status of the temperature sensor, will
generate traps.
Fabric Watch Administrator's Guide
53-1001770-01
Trap Recipient's IP address in dot notation: [0.0.0.0]
Community (ro): [FibreChannel]
Trap Recipient's IP address in dot notation: [0.0.0.0]
SNMP access list configuration:
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
.
.
.
Committing configuration...done.
sswitch:admin>
string in the Community field. To perform set operations, enter the write community into the
Write Community field.
Interfaces for activating Fabric Watch
4
31