Switch Health Report; Generating A Switch Health Report - Brocade Communications Systems 8 Administrator's Manual

Switch Health report

The Switch Health report lists the following information:
•
•
•
The switch health report is available even without Fabric Watch, but for licensed Fabric Watch
users, the marginal and faulty ports are included in the report. The following is an example of a
switch health report.
NOTE
Switch health report details do not display the health status of GbE ports. Fabric Watch only
monitors and reports the status for physical and virtual FC ports.

Generating a Switch Health report

1. Connect to the switch and log in as admin.
2. Enter the switchStatusShow command to generate a Switch Health report.
Fabric Watch Administrator's Guide
53-1001770-01
2/12
2/13
2/14
2/15
3/0
3/1
3/2
3/3
3/4
3/5
3/6
3/7
3/8
3/9
3/10
.
.
.
Current health of each port, based on the currently-configured policy settings.
High-level state of the switch, the power supplies and temperature monitor.
All ports that are in an abnormal state and the current health state of each port.
cp0 login: admin
Password:
Sat 240 :admin> switchstatusshow
Switch Health Report
Switch Name: Sat 240
IP address: 1080::8:800:200C:417A
SwitchState: HEALTHY
Duration: 01:10
Power supplies monitor
Temperatures monitor
Fans monitor
WWN servers monitor
Standby CP monitor
LB 100
LB 100
U 0
LB 100
T 100
U 0
U 0
U 0
U 0
U 0
U 0
U 0
U 0
U 0
VE 100
Report time: 08/21/2006 05:23:22 PM
HEALTHY
HEALTHY
HEALTHY
HEALTHY
HEALTHY
Switch Health report
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
9
0
0
100
0
0
100
100
100
100
100
100
100
100
100
0
97