Environment Monitoring Setting Guidelines; Environment Class Default Settings; Table 23 Environment Class Default Settings - Brocade Communications Systems 8 Administrator's Manual

8
Environment monitoring

Environment monitoring setting guidelines

Use Environment Class default settings. Temperature settings are switch-dependent and there is
no need to alter them. The default alarm configuration, sending alerts to the error log and SNMP, is
sufficient.

Environment class default settings

Table 23
hardware reference manual for differences in actual environmental requirements.
NOTE
Fabric Watch no longer supports fan monitoring. Event Manager (EM) now manages fan monitoring
and the switch status is calculated based on the fan status reported by EM.
TABLE 23
Area
Temperature
82
provides default Environment class settings for all switches. Check the appropriate
Environment class default settings
Description
Monitors switch
temperature in
Celsius
Default threshold Default alarm settings
settings
Unit: degrees C Changed: 0
Time Base: none
Below: 3
Above: 3
Brocade 200E
In-Between: 3
Low: 0
High: 60
(Same setting for all
Buffer: 10
devices)
Brocade 300
Low: 0
High: 50
Buffer: 10
Brocade 4100
Low:0
High: 60
Buffer: 10
Brocade 4900
Low: 0
High: 47
Buffer: 10
Brocade 5000
Low:0
High: 60
Buffer: 10
Brocade 5100
Low: 0
High: 63
Buffer: 10
Brocade 5300
Low: 0
High: 48
Buffer: 10
Threshold state
Informative
Out-of-range
Out-of-range
In_range
(Same setting for all
devices except
Brocade DCX-4S)
Fabric Watch Administrator's Guide
53-1001770-01