Verify - Cisco AS5300-96VOIP-A Software Configuration Manual

Configuring Modem Pooling
Table 3-19
Step
4
5

Verify

To verify your modem pooling configuration:
•
Tips
If you are having trouble:
•
•
3-34 Cisco AS5300 Universal Access Server Software Configuration Guide
Configuring Modem Pooling (Continued)
Command
5300(config-modem-pool)# called number phone #
max-conn number
5300(config-modem-pool)# Ctrl-Z
5300#
Enter the show modem-pool command to view information for all modem pools. To view
information for a specific modem pool, enter the show modem-pool name command.
5300# show modem-pool
modem-pool: System-def-Mpool
modems in pool: 119 active conn: 0
0 no free modems in pool
modem-pool: test
modems in pool: 1 active conn: 0
0 no free modems in pool
called_party_number: 1000
0 max-conn exceeded, 0 no free modems in pool
Make sure you have not configured the same called party number for multiple pools.
Make sure you have not placed modems in multiple pools.
Purpose
Specifies the DNIS to be used for this
modem pool. The DNIS string can have
an integer x to indicate a do not care digit
for that position.
The max-conn option specifies the
maximum number of connections
allowed for this DNIS. If you do not
specify a max-conn value, the default
(total number of modems in the pool) is
used.
The max-conn values can range from
one to the total number of modems in the
pool.
Return to enable mode.