Table of Contents
Advertisement
Basic Configuration
This chapter describes how to use the Cisco IOS software command-line interface (CLI) to configure
basic access server functionality, including:
•
LAN and WAN configuration (including Integrated Services Digital Network [ISDN], Primary
Rate Interface [PRI], and channelized T1 and E1)
•
Modem configuration
•
Voice-over IP (VoIP) configuration
Follow the procedures in this chapter to configure the access server manually or if you want to
change the configuration after you have run the setup script (described in the chapter "First-Time
Configuration").
This chapter does not describe every configuration possible—only a small portion of the most
commonly used configuration procedures. For advanced configuration topics and procedures, refer
to the topic Configuring Cisco IOS Features online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/index.htm
You can also view these publications on the Documentation CD-ROM that arrived with your access
server, or you can order printed copies separately.
If you are experienced using the Cisco IOS software, you might find the "Comprehensive
Configuration Examples" section at the end of this chapter a useful reference for configuration.
Note
If you skipped the previous chapter, "Using Cisco IOS Software," and you have never
configured a Cisco access server, go back to that chapter and read it now. This chapter provides
important information you will need to succeed with the configuration.
C H A P T E R
3
Basic Configuration 3-1
Advertisement
Table of Contents
