Setting The Scsi Id - Minolta Dimage scan dual User Manual

SETTING THE SCSI ID

A SCSI ID is a unique address you assign to each SCSI device connected to your PC. The
SCSI ID range of your PC is from 0 to 7. Do not use a SCSI ID for more than one SCSI
device.
Setting the SCSI ID
1. Turn off the PC and all connected SCSI devices.
2. Determine which SCSI IDs are not being used.
3. Using a pointed object, set the switches to an
unused SCSI ID.
• The Dimâge Scan Dual's SCSI ID is factory preset to 5. If 5 is not
occupied, there is no need to change the SCSI ID.
• Two operating SCSI devices in the same SCSI chain cannot share a
SCSI ID.
SCSI ID Dip Switch Settings
6
Turn off the PC and all the devices in the SCSI chain down
before changing SCSI IDs, connecting, or disconnecting SCSI
cables. Hardware damage may occur if this precaution is not
followed.