Specifications - Classe Audio CP-500 - V2.4 Owner's Manual

36
Specifications
All specifications are accurate at the time of printing. Classé reserves the right to make
improvements without notice.
■ Frequency response
■ Distortion (THD + noise)
■ Maximum input voltage (single-ended)
■ Maximum input voltage (balanced)
■ Maximum output voltage (single-ended)
■ Maximum output voltage (balanced)
■ Gain range
■ Input Impedance
■ Output Impedance (main output)
■ Signal-to-noise ratio (ref. 10Vrms input)
■ Channel separation
■ Crosstalk (any input to any output)
■ Rated power consumption
■ Idle power consumption
■ Mains voltage
■ Overall dimensions
■ Net weight
■ Shipping weight
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX ® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
DC – 200kHz ± 0.1dB
-100dB to +14dB
better than 100dB
better than -120dB @ 1kHz
determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
Width: 17.5" (445mm)
Depth: 16.5" (419mm)
Height: 4.75" (121mm)
0.003%
5Vrms
10Vrms
10Vrms
20Vrms
100kΩ
100Ω
100dB
30W
29W
26lbs (12kg)
33lbs (15kg)