Care And Maintenance; Cleaning The Cabinet; Cleaning Thelcd Touchscreen; Installing Theremote Control Batteries - Classe Audio CP-500 - V2.4 Owner's Manual

cleaning the cabinet

Caution!
cleaning the
LCD touchscreen
Important!
installing the
remote control batteries

Care and Maintenance

To remove dust from the cabinet of your preamplifier, use a feather duster or a soft,
lint-free cloth. To remove dirt and fingerprints, we recommend isopropyl alcohol and a
soft cloth. Dampen the cloth with alcohol first and then lightly clean the surface of the
preamplifier with the cloth. Do not use excessive amounts of alcohol that might drip off
the cloth and into the preamplifier.
At no time should liquid cleaners be applied directly to the surface
of the preamplifier, as direct application of liquids may result in
damage to electronic components within the unit.
To clean the LCD touchscreen, use a microfiber eyeglass wipe or soft, lint-free cloth,
together with a cleaning solution designed for plastic eyeglasses or LCD computer
monitors/televisions.
Spray the solution onto the cloth or tissue – never directly onto the
touch screen.
The battery compartment is situated at the base of the remote control. Remove the two
screws holding the base plate in place, taking care not to lose them. Insert the two AA
batteries (supplied), ensuring that the polarity is the same as that indicated on the inner
surface of the remote control.
35