Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CAME FTX20DLC
Summarization of Contents
Maintenance and Troubleshooting
Maintenance Procedures
Detailed steps for cleaning and checking operator components.
Troubleshooting Guide
Solutions for common operator issues like not opening or closing.
Installation Safety Precautions
General Installer Safety
Crucial safety instructions and warnings for installers.
Hazard Identification
Identifies specific dangers like high voltage and crushing.
Product Information
Product Description
Detailed description of the swing-gate operator and its components.
Intended Use and Limitations
Specifies intended applications and graphical limits for gate size.
Product Dimensions
Technical drawings showing the physical size and measurements of the operator.
Component Identification
Description of Parts
Lists and illustrates all components of the operator unit.
Technical Data and Installation Overview
Technical Specifications
Provides key technical specifications like IP rating, power, torque, and weight.
Standard Installation Diagram
Diagram showing typical components and their placement in a standard installation.
Installation Guidelines
General Installation Indications
Guidelines for cable types, minimum thicknesses, and preliminary checks.
Preliminary Installation Checks
Essential checks before starting the gate operator installation process.
Cable Specifications
Table detailing required cable specifications for various connections.
Mounting and Assembly Procedures
Initial Installation Works
Preparation steps for installing junction boxes and tubing.
Brace Measurement and Fitting
Guidance on measuring and fitting gate braces and post braces.
Securing the Braces
Instructions for marking, drilling, and securing gate-post and gate braces.
Operator Setup and Adjustment
Preparing and Fastening the Operator
Steps for removing the operator cover and securing the gearmotor.
Installing Mechanical Stops
Instructions for installing the opening and closing mechanical stops.
Setting Limit-Switch Points
Procedure for adjusting the gate's opening and closing limit switches.
Control System and Wiring
Control Card and Parts
Details the functions and layout of the ZL65 control board and its parts.
Power Supply Connection
Wiring diagrams for the power supply and transformer connections.
Ancillary Device Connections
Instructions for connecting electric locks and signaling devices.
External Controls and Safety Features
Control Device Integration
Information on connecting various control devices like keypads and transponders.
Photocell Safety System
Wiring and configuration for photocell safety devices.
Sensitive Safety Edges
Guidance on connecting sensitive safety edges compliant with EN 12978.
System Programming
Programming Commands
Explains the functions of the control panel buttons (ESC, <, >, ENTER).
Function Menu Overview
Lists and describes various programming functions (F1-F9).
Motor and Timing Functions
Details functions related to motor operation, timing, and thrust.
Advanced Configuration Settings
Gate Movement Settings
Functions for setting gate travel speed, slow-down, and approach points.
Motor and COM Speed Settings
Configuration for motor approach and slow-down points, COM speed.
Wireless Input Configuration
Setup for wireless safety devices like RIO-EDGE and RIO-CELL.
System Configuration and Management
System Setup and Testing
Steps for initial system configuration and commissioning.
User Management
Instructions for adding, deleting, and managing users and system data.
Data Management with Memory Roll
Procedures for saving and uploading system configuration data using the Memory Roll.
Final Operations and Disposal
Final Installation Steps
Instructions for securing the operator cover and transmission arm protection.
Error Message List
List and explanation of error codes displayed on the control unit.
Dismantling and Disposal Instructions
Guidelines for safely dismantling and disposing of the product and packaging.
Need help?
Do you have a question about the FTX20DLC and is the answer not in the manual?
Questions and answers