Operation; Before Operating - Denon AVR-4802R Operating Instructions Manual

9 OPERATION

Before operating

1 Refer to "CONNECTIONS" (pages 6 to 13) and check that all
connections are correct.
2 Select "AMP" using the AMP button.
(only when operating with the remote control unit)
3 Turn on the power.
Press the POWER switch (button).
ON / STANDBY
(Main unit)
• When pressed, the power turns on and the display lights.
The sound is muted for several seconds, after which the
unit operates normally.
• When pressed again, the power turns off, the standby
mode is set and the display turns off.
• Whenever the ON/STANDBY button is in the STANDBY
state, the apparatus is still connected on AC line voltage.
Please be sure to unplug the cord when you leave home
for, say, a vacation.
46
(Remote control unit)
ON/STANDBY
(Remote control unit)
3
Light
2
3
AMP 3