• MP3 format Internet radio programs can be listened to. • Your favorite radio stations can be registered by accessing the exclusive DENON Internet radio URL using a computer’s browser. (The AV amplifier automatically downloads the registration settings (approximately once every other day).) (This is managed separately for each unit, so a MAC address or e-mail address must be registered.)
DHCP and Auto IP functions. Connecting Other Sources 2 Connections Connect one side of the Ethernet cable (CAT-5) to the ETHERNET connector on the AVR-5805/4806’s rear panel, the other side to the router. AVR-4806 Internet radio Modem Router About Network Settings...
Basic Operation (AMP mode) NUMBER ENTER CURSOR MEMORY MEMORY BLOCK Operating the remote control unit The digital tuner system buttons shown on the diagram below are used for net audio operations. RC-995 •, ª : Character search MODE : Configuration mode selection : Preset and favorite registration CH +, –...
Page 5
Basic Operation CURSOR D D Press the button to select the ENTER desired setting item, then press the CURSOR G G button. Finally, the list of Internet radio stations is displayed and ∗ those that can be played are indicated by the “ ”...
Page 6
Basic Operation (MODE AMP) TUNING ENTER CURSOR MODE MEMORY 2 Deleting radio stations from your favorites At the screen on which the Internet radio stations registered in your favorites are CURSOR D D displayed, press the button to choose the radio station you want to delete, then MEMORY press the button.
Page 7
Basic Operation Playing music files stored on the computer (music server) The necessary system connections and settings must be made in order to play music files. Music files (of WMA, MP3 or WAV format) or playlists (of m3u or wpl format) stored on a computer (music server) connected to the amplifier via a network are played.
Page 8
Basic Operation Network-related settings (Network Setup) If you are using a broadband router (DHCP function), there is no need to make the settings at “System Setup Menu” - Setup” - “7.Network Setup”, since the DHCP function is set to “ON” in the AVR-5805/4806’s default settings. If the AVR-5805/4806 is being used connected to a network without the DHCP function, the network settings must be made.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 10
TOKYO, JAPAN www.denon.com Denon Brand Company, D&M Holdings Inc. Printed in Japan 00D 511 4425 000...