Setting The Crossover Frequency - Denon AVR-4802R Operating Instructions Manual

Setting the Crossover Frequency

Set the crossover frequency mode according to the speaker system being used.
1
2
Crossover frequency
• Set the frequency (Hz) below which the bass sound of each main speakers is to output from the subwoofer or from speakers which are set to
"Large" (when not using a subwoofer) (crossover frequency).
• For speakers set to "Small", sound with a frequency below the crossover frequency is cut, and instead the cut bass sound is output from the
subwoofer or speakers which are set to "Large".
• This crossover frequency mode is valid when "Subwoofer" is set to "Yes" at "Speaker Configuration Setting" or when speakers are set to
"Small".
FIXED –THX–:
Set to the THX rated 80 Hz crossover frequency.
VARIABLE 40, 60, 80, 100, 120 Hz:
Set as desired according to your speakers' bass playback ability.
NOTES:
• The crossover frequency is set to 80 Hz in the HOME THX CINEMA mode.
• We recommend using with the crossover frequency set to "FIXED –THX–", but depending on the speaker, setting it to a different frequency
may improve frequency response near the crossover frequency.
Setting the Subwoofer mode
This setting is displayed when "Front" is set to "Large" and "Subwoofer" is set to "Yes".
1
Select the subwoofer mode.
2
20
Select the Crossover Frequency mode.
To select the Crossover Frequency.
Enter the setting.
The System Setup Menu reappears.
Select the setting.
Enter the setting.
The System Setup Menu reappears.