Denon AVR-4802R Operating Instructions Manual page 41

Setting the back light's lighting time
1 Press the power ON/SOURCE button and the OFF button at
the same time.
•
"PRE" appears on the remote control unit's display.
2
Use the • and ª cursor buttons to display "BKLT" on the
remote control unit, then press the ENTER button.
•
"05SEC" appears on the remote control unit's display.
3
Use the • and ª cursor buttons to adjust the lighting time (3
sec ~ 30 sec), then press the ENTER button.
•
"OK" is displayed and that lighting time is set.
Resetting
(1) Resetting the preset memory
1 Press the power ON/SOURCE button and the OFF button at
the same time.
• "PRE" appears on the remote control unit's display.
2
Use the • and ª cursor buttons to display "RST" on the
remote control unit, then press the ENTER button.
1
DVD
2, 3
1
DVD
2, 3, 4
1
2, 3
1
2, 3, 5
41