Table of Contents
Advertisement
12 LISTENING TO THE RADIO
• Check that the remote control unit is set to AMP.
Auto tuning
1
Set the input function to "TUNER".
INPUT SELECTOR
(Main unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
Manual tuning
1
Set the input function to "TUNER".
INPUT SELECTOR
(Main unit)
2
(Remote control unit)
3
(Remote control unit)
(Remote control unit)
Watching the display, press the
BAND button to select the desired
band (AM or FM).
Press the MODE button to set the
auto tuning mode.
"Auto" appears on the display.
Press the TUNING + (up) or –
(down) button.
Automatic searching begins, then
stops when a station is tuned in.
(Remote control unit)
Watching the display, press the
BAND button to select the desired
band (AM or FM).
Press the MODE button to set the
manual tuning mode.
Check that the display's "AUTO"
indicator turns off.
1
3
1
4
Press the TUNING + (up) or – (down)
button to tune in the desired station.
The frequency changes continuously
when the button is held in.
(Remote control unit)
NOTES:
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and
"STEREO" indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
AMP
2
4
73
Hide quick links:
Advertisement
Table of Contents
