Denon AVR-4802R Operating Instructions Manual page 45

(5) All reset function
• This function is for resetting all the settings to the factory defaults.
1 Press the power ON/SOURCE button and the OFF button at
the same time. "PRE" appears on the remote control unit's
display.
2
Use the • and ª cursor buttons to display "RST" on the
remote control unit, then press the ENTER button.
3
Use the • and ª cursor buttons to display "ALL" on the
remote control unit, then press the ENTER button.
• The LCD's back light flashes during the resetting operation,
and when the operation is completed, "OK" is displayed
and the set returns to the normal operating mode.
1 1
DVD
2, 3
2, 3
45